On July 10, our Russian customer ordered a road marking cleaning hydro blasting machine from us. We completed the production as scheduled and the equipment was sent to Russia today.
Equipment Overview
The ground marking removal high-pressure cleaning machine is a cleaning equipment specially used to remove stubborn stains such as ground markings, paint, and adhesives. This equipment is widely used in road construction, parking lots, factory workshops and other places. It has the advantages of high cleaning efficiency, simple operation, environmental protection and energy saving, and is a powerful assistant for ground cleaning work.
Working Principle
The working principle of the ground marking removal hydro jetting machine is mainly to pressurize water to high pressure through a high-pressure pump, and then spray the high-pressure water flow onto the ground marking through a spray gun, and use the impact force of the water flow to remove the marking. At the same time, the equipment is equipped with a heating system, which can heat water during the cleaning process to improve the cleaning effect. In addition, the high-pressure cleaning machine is also equipped with a vacuum suction system, which can suck the water mist and dirt generated during the cleaning process into the equipment to avoid secondary pollution.
Technical parameters
The following are the main technical parameters of the ground marking removal high-pressure jetting machine:
1. Working pressure: 1500bar
2. Flow rate: 85L/min
3. Power: 225kW
4. Dimensions: Depends on different models
How to use
1. Preparation: Make sure the equipment is in good condition, check whether the power supply, water source, and oil circuit are normal, and place the cleaning machine on a flat ground.
2. Connect the water source: Connect the water source to the equipment, turn on the water source switch, and check for water leakage.
3. Turn on the equipment: Press the power switch, start the high-pressure pump, and adjust the working pressure to the appropriate range.
4. Cleaning operation: Aim the spray gun at the ground marking, keep a certain distance, and slowly move the spray gun so that the water flow is evenly sprayed on the marking.
5. After cleaning: Turn off the power, retract the spray gun, empty the water tank, and clean the equipment.
Maintenance
1. Check the power supply, water source, and oil circuit regularly to ensure that the equipment is working properly.
2. Check key components such as high-pressure pumps and spray guns. If damaged, replace them in time.
3. After each use, empty the water tank to prevent freezing.
4. Clean the surface of the equipment regularly to keep the equipment clean.
5. When storing, place the equipment in a dry and ventilated environment.
In short, the ground marking removal hydro jetting machine is an efficient and environmentally friendly cleaning equipment, which is widely used in various ground cleaning scenarios. Correct use and maintenance of the equipment can not only improve cleaning efficiency, but also ensure safe operation.
