23500Psi Hydro Blasting Machine

The 120L/min 23500Psi Hydro Blasting Machine can directly remove stubborn contaminants such as oil, rust, and cement clumps, eliminating the need for excessive reliance on chemical cleaners. The 120L/min flow rate quickly covers large areas while simultaneously rinsing away the removed dirt, preventing secondary adhesion. The high-pressure water jet can penetrate deep into crevices and hard-to-reach corners, reducing residue compared to low-pressure washers.

The 1600 bar, 120 L/min hydro blasting machine is a top-of-the-line configuration, even among professional-grade options. The 1600 bar pressure means the water jet has extremely strong cutting and peeling capabilities. It can easily remove stubborn dirt that ordinary equipment cannot handle, such as: thick industrial paint, marine paint, hard concrete deposits (cement, scale), thick layers of rust and scale on metal surfaces, and hard coking and polymer residues from the petrochemical industry.

The automatic heat exchanger cleaning Hydro Blasting Machine is a practical and convenient system that can be paired with a variety of automation systems. The system can control, efficiently and safely clean the inner diameter of heat exchanger tubes. The automatic heat exchanger cleaning System can also be paired with other high-pressure nozzles for tube sheet cleaning and surface preparation. It is specially designed to be modular, lightweight, easy to install and scalable for various exchanger sizes or configurations.

With decades of experience in manufacturing industrial cleaning equipment, we know that there are certain "problem" equipment in manufacturing plants, power plants and other facilities across the country. Because they are installed in a way that makes it extremely difficult to access them, these equipment are rarely thoroughly cleaned. This industrial pipe automatic cleaning system can achieve thorough cleaning of industrial heat exchangers and condensers that have been fouled for many years.

 

 

product key technologies

01.

Main Fetures

1. Lightweight design, easy to move the cleaning equipment;
2. Can drive two cleaning soft guns to work at the same time;
3. During cleaning, the speed of inlet and outlet pipes can be adjusted independently;
4. High cleaning efficiency and fast speed.

02.

Automatically rotating nozzle improves cleaning efficiency and reduces work difficulty.
High-pressure water jet cleaning is a cleaning method that uses a high-pressure pump to pressurize water and then sprays it onto the surface of the object through a nozzle
The equipment is reasonably designed and can work continuously for a long time.

This automatic condenser tube cleaning Hydro Blasting Machine is equipped with an automatic positioner. The cleaning tool used is very flexible and can even pass through curved condenser tube for thorough cleaning. For specific projects, an automatic dual-gun machine can be used to speed up the cleaning process by cleaning multiple pipes at the same time.

 

 

Automatic dual-gun Machine

ASutomatic tube cleaning system

Automatic Three-gun Machine

We often reduce traditional cleaning times by 40% or more, getting plants and equipment back up and running with far less downtime and production losses than ever before.

For the automatic condenser tube cleaning Hydro Blasting Machine, the job was completed in seven hours, about 40% less time than using the manual spray gun method. And the automatic cleaning system will achieve a more precise and thorough cleaning than the handheld high-pressure gun cleaning method.

 

Effect comparison

Rust Removal

Rust Removal

Paint Removal

Customized service for each job

Our automated boiler, heat exchanger and other equipment cleaning systems are very flexible, allowing us to fully customize our equipment and methods to complete each job. We will develop more efficient, safer and more economical cleaning solutions for customers based on customer needs and site conditions.

Whether the challenge is a water tank with decades of hardened mineral buildup or a pile of boiler tubes that can't be reached with manual cleaning equipment, there are automated solutions to solve these problems.

1. Heat exchanger cleaning;

2. Condenser tube cleaning;

4. Industrial pipe/tank cleaning;

5. Boiler tank cleaning.

Customer Cases

 

Automatic condenser cleaning

Automatic condenser cleaning

Automatic cleaning of heat exchanger

Automatic cleaning of heat exchanger

Automatic condenser cleaning

Automatic condenser cleaning

Zhengzhou GuangYuan Cleaning Equipment Co.,Ltd. Is a manufacturer for high pressure water jetting machine, founded in 2012, is committed to explore the field of a high pressure water jet market brand. Our company is located in Henan Province, China.

We are professional in the design, manufacture and production of high pressure cleaning machine, water blaster, High pressure cleaner, high pressure pump, cleaning system customization etc. Our cleaning machine can be applied in both industrial and family cleaning, such as shipyard, power plant, starch factory, etc.  Our company has years of research and experience in first-class design technology, excellent assembly line and good quality control system. Our products are welcomed by customers from all over the world. We sincerely look forward to cooperating with new and old clients.

01

Advanced Technology

We work closely with KAMAT, a world leader in cleaning machine industry, with the highest pressure of 3000bar, which is currently the highest pressure in the world's high-pressure water jet field.

02

Stable and Safe

The pressure regulating valve is flexible and light. The overpressure protection safety valve opens and closes sensitively and reliably. The bursting pressure of the high-pressure hose is 2.5-3.5 times the rated pressure.

03

Excellent Quality

The high pressure cleaning machine is manufactured and inspected strictly in accordance with national and industry standards before leaving the factory. It can work continuously for 24 hours at rated pressure

04

Custom Service

We understand that different industries and cleaning requirements may have specific needs. Therefore, we offer customization service, allowing customers to tailor the machine to their unique requirements.

1. Packing: Plywood packing

2. Shipping way: suggest deliver by sea

3. Delivery port: Qingdao Port; or deliver to any port you need

Hot Tags: 23500psi hydro blasting machine, China 23500psi hydro blasting machine suppliers, factory, hydro jet cleaning equipment, hydro jetting machine, industrial pipe cleaning machine, tank pipeline cleaning machine