350L/min 300bar High Pressure Water Jet Drilling Piling Equipment

The 350L/min 300bar High Pressure Water Jet Drilling Piling Equipment can effectively cut and erode hard, dense formations that are difficult for traditional mechanical methods to handle. For dense gravel layers, hard plastic clay, mudstone, and strongly weathered sandstone, mechanical drill bits wear out quickly and progress is slow. High-pressure water jets, through hydraulic fracturing and erosion, can efficiently break and remove the soil. Pure hydraulic operation completely avoids strong vibration waves. This is crucial for construction in sensitive areas near existing buildings, subway tunnels, precision instrument factories, and historical protected buildings, effectively preventing cracking and settlement of structures caused by vibration.

350L/min 300bar High Pressure Water Jet Drilling Piling Equipment is a construction method that uses high-pressure water jet technology to assist in drilling and then piling in pile foundation construction. Compared with traditional piling methods, such as hammering piles, which will produce huge noise, high-pressure water jet piling mainly relies on high-pressure water jets to drill holes, which has relatively low noise and less interference to surrounding residents and the environment. It is especially suitable for areas with strict noise restrictions such as urban centers.

With the further promotion of the green prefabricated building concept in the development of the construction industry, prefabricated piles such as steel sheet piles, H-shaped steel, and steel pipe piles are increasingly used in underground projects such as deep foundation pits. At present, the traditional vibration method is generally used for pile sinking construction of prefabricated piles. However, this method is more difficult to sink piles in harder soil layers (hard plastic clay, dense sand layers, etc.), progresses slowly, and is extremely inefficient.

High-pressure water jet assisted piling technology solves this problem!

After high-pressure water jet assisted drilling, the pile driving resistance is significantly reduced, the pile sinking speed is accelerated, the efficiency is increased by more than 50%, and the construction cost is not increased. Since the difficulty of pile driving is greatly reduced, the quality of the pile body is effectively protected.

The 350L/min 300bar High Pressure Water Jet Drilling Piling Equipment has the characteristics of safety, reliability, fast construction speed, low cost, reduced construction noise, energy saving and environmental protection, and the difficulty of pile sinking is significantly reduced.

The piling resistance is reduced, and for hammering piles, the hammering energy will be greatly reduced; for static pressure piles, the static pressure mechanical operating power will also be greatly reduced, which is energy-saving and environmentally friendly.

 

 

product key technologies

01.

Main Fetures

1. The high pressure pump introduces Germany WOMA advanced technology, vertical stainless steel pump head, stainless steel nickel plated alloy plunger, forced cold water cooling;

2. High pressure pump box material ductile iron, good heat dissipation, hard texture, not easy to deformation;

 

02.

Scope of application

Different solutions can be applied to different soil conditions:
In hard soil, the water jet head can be used to directly sink and drill holes, and the advantages of pile driving are obvious;
Clay layer, sand layer, residual soil or fully weathered rock can also be applied. When the geology is fully weathered rock, high-pressure water can be used directly to punch holes;
Not applicable to weathered rock or strongly weathered rock formations.

 

product details

 

 

Main console

Diesel Engine

Nozzle

 

Effect comparison

Large flow water column

Large flow water column

Large flow water column

About Guangyuan UHP Hydro Blaster/UHP Water Blaster System

We manufacture the most special, professional , stable high pressure pure water jetting unit for our customers-also called hydro blaster or water blaster. Our UPH water cleaning system employ the demanding task in nearly all the industries. The system endows the safety, environmental-friendly, high efficiency, cost down and value more, widely used in cleaning heat exchanger, autoclave, pipeline, reaction kettle etc.

Why Choose UHP Pure Water Cleaning

Equipment of Petrochemical industries as heat exchanger, condenser, autoclave, accumulated plenty of debris in the bundle tube, facing the risk of efficiency of heat exchanging, fluid flow, and heated unevenly to cause the pipe crack or even explode. Scheduled cleaning is extremely important for production. Universally knowing, pure water cleaning is the most economic, safe, on contamination environmental friendly, low cost method of cleaning petrochemical industrial production equipment.

High pressure water jet guide hole piling
High pressure water jet guide hole pulling out piles

Customer Cases

 

High pressure water jet assisted piling

High pressure water jet assisted piling

High pressure water jet assisted piling

High pressure water jet assisted piling

High pressure water jet assisted pile pulling

High pressure water jet assisted pile pulling

Other application

Heat Exchanger Cleaning Bundle Blaster

The Bundle Blaster system offers a powerful and affordable automated solution for external cleaning of heat exchangers, evaporators, condensers, and other industrial tube bundles. This system is ideal for contractors and plants interested in low maintenance, cost-effective, easy-to-use equipment. The Bundle Blaster is safer and more effective than traditional hand-held methods of shell side cleaning, and 1/3 of the cost of trailer mounted systems.

Reactor Tank Cleaning Solution

Reactor tanks are critical components in various industries, including chemical manufacturing, pharmaceuticals, petrochemicals, and food processing. As these industries grow, so does the demand for efficient and reliable cleaning solutions for reactor tanks. The market for reactor tank cleaning solutions is expanding due to the increasing need for regular maintenance, safety compliance, and operational efficiency.

 

Concrete Mixer Drum Blasting System

The concrete mixer drum blasting system is an automated accessory designed specifically for removing residual concrete from the drum's inner walls, blades, and inlet and outlet ports. It is a core device for batching plants, ensuring production quality, improving efficiency, and reducing costs. Its core philosophy is to replace the inefficiency and high risks of traditional manual cleaning with a "powered drive + precise spraying + intelligent control" approach, achieving an upgrade from "passive residue removal" to "active safety assurance."

Concrete Demolition System

The system uses high-pressure water jet technology to quickly and accurately the concrete of subways, bridges, and tunnels, while retaining the steel bars intact. There is no need to add any chemicals or abrasive materials to the water, and the crushing and demolition operation can be completed solely by the pressure and flow rate of high-pressure water jets. The demolition process is vibration free, pollution-free, and environmentally friendly.

Company profile

Zhengzhou GuangYuan Cleaning Equipment Co.,Ltd. Is a manufacturer for high pressure water jetting machine, founded in 2012, is committed to explore the field of a high pressure water jet market brand. Our company is located in Henan Province, China.

We are professional in the design, manufacture and production of high pressure cleaning machine, water blaster, High pressure cleaner, high pressure pump, cleaning system customization etc. Our cleaning machine can be applied in both industrial and family cleaning, such as shipyard, power plant, starch factory, etc.  Our company has years of research and experience in first-class design technology, excellent assembly line and good quality control system. Our products are welcomed by customers from all over the world. We sincerely look forward to cooperating with new and old clients.

01

Advanced Technology

We work closely with KAMAT, a world leader in cleaning machine industry, with the highest pressure of 3000bar, which is currently the highest pressure in the world's high-pressure water jet field.

02

Stable and Safe

The pressure regulating valve is flexible and light. The overpressure protection safety valve opens and closes sensitively and reliably. The bursting pressure of the high-pressure hose is 2.5-3.5 times the rated pressure.

03

Excellent Quality

The high pressure cleaning machine is manufactured and inspected strictly in accordance with national and industry standards before leaving the factory. It can work continuously for 24 hours at rated pressure

04

Custom Service

We understand that different industries and cleaning requirements may have specific needs. Therefore, we offer customization service, allowing customers to tailor the machine to their unique requirements.

1. Packing: Plywood packing

2. Shipping way: suggest deliver by sea

3. Delivery port: Qingdao Port; or deliver to any port you need

Hot Tags: 350l/min 300bar high pressure water jet drilling piling equipment, China 350l/min 300bar high pressure water jet drilling piling equipment suppliers, factory, hydro jet cleaning equipment, hydro jetting machine, industrial pipe cleaning machine, tank pipeline cleaning machine