Precautions for pressure washers

1· When operating a pressure washer: Always wear appropriate goggles, gloves and mask.
2. Always keep hands and feet away from touching the cleaning nozzle.
3. Always check all electrical connectors.
4. Check all liquids frequently.
5. Always check the hose for cracks and leaks.
6· When the spray gun is not in use, the setting trigger must always be safely locked.
7· Always work with the lowest pressure possible, but this pressure should be enough to get the job done.
8· Before disconnecting the hose, always release the pressure in the washer.
9· Always drain the hose of water after each use.
10· Never point the airbrush at yourself or anyone else.
11· Never start the device until all hose fittings have been checked to be locked in place.
12· Never start the device until the supply water is switched on and the appropriate water is allowed to flow through the gun barrel. The required cleaning nozzle is then attached to the gun holder.
Note: Do not leave the pressure washer unsupervised during operation. Each time the trigger is released, the pump will run in bypass mode. If a pump has been running in bypass mode for a long time, the excessive temperature of the circulating water in the pump will shorten the service life of the pump or even damage the pump. Therefore, avoid running the device in bypass mode for a long time.