Hydro Water Sand Blasting Machine

The 500 bar 23 L/min Hydro Water Sand Blasting Machine combines the cutting power of ultra-high-pressure pure water jets with the abrasive action of abrasives (sand), making it an extremely powerful surface treatment tool. It uses ultra-high-pressure water as a carrier to entrain and accelerate tiny abrasive particles, forming a high-speed abrasive water jet. It can easily remove tough coatings, such as epoxy asphalt coatings in ship ballast tanks, thick layers of fire-retardant paint on large steel structures, and multi-layer paints in storage tanks.

 

The process of Hydro Water Sand Blasting Machine to contaminating dust, making it safe for use in or around shipyard, marine, Anti-corrosion engineering, etc
The angle of attack and distance from the work surface may be varied to provide the best work speed, while still maintaining the greatest amount of impact energy. For optimum performance the sand inlet hose should not exceed 5 meters

 

When the sand unit is operating efficiently, there will be a smooth and continuous flow of sand through the nozzle. The amount of sand flow is directly related to the vacuum created in mixing nozzle. The intensity of the vacuum is dependent upon the liquid velocity of the water.

Main Features:

Through Hydro Water Sand Blasting Machine which uses high-pressure power washers to achieve rust and paint removal. The process of wet sand blasting produces to contaminating dust, making it safe for use in or around shipyard, marine, Anti-corrosion engineering, etc
The angle of attack and distance from the work surface may be varied to provide the best work speed, while still maintaining the greatest amount of impact energy. For optimum performance the sand inlet hose should not exceed 5 meters

ADVANTAGES of marine Hydro Water Sand Blasting Machine
Because of the water ingredient, marine water sand blasting machine will not create any environmental pollution problem caused by fluttering the micro power.
It can remove the burrs (surface projections) & scales formed on surface and clean the surface without damaging the work piece.
The surface finishing can access a homogeneous matte finish (spot pattern). It can contribute significantly to the finishing demand for surface roughness.
It only applies small shot blasting effect to the surface to be finished and improve and reinforce the material of work piece.
The foreign materials after being removed will be rinsed and flushed out by the jet of water.
It doesn't require any chemical during operation.
It doesn't affect the dimensions of the object.

APPLICATION:

1.Surface heavy dirt cleaning

2.Ground / wall cleaning;

3.Shipyard rust paint removal; dirt cleaning

4.Formwork cement removal;

5.Industrial pipe cleaning;

6.Root carving bark cleaning;

7.Casting burr removal;etc

Model	GYB-500
Speed	1480 rpm
High pressure pump	Triple plunger pump
	Pump head material: copper
	Plunger material:ceramic
Rate Pressure	500 bar / 7250 psi
Water flow	23 L/min
Plunger dia.	18mm
Diesel engine	33kw, 4-cylinder HD brand;
Electric power	22kw, 3Phase, 380v/50Hz or 440v/60Hz

 

Hot Tags: hydro water sand blasting machine, China hydro water sand blasting machine suppliers, factory, sewer jetting machine, , ,