Water Jet Concrete Demolition System

Concrete hydrodemolition robot equipment is a concrete demolition machine that uses high-pressure water to remove old and solid concrete as well as asphalt.
Hydrodemolition machines are commonly used to remove damaged or deteriorated concrete from bridges, highways and other structures. The high-pressure water jet system not only removes the damaged concrete surface, but also cleans the surface underneath to provide a clean base for repair.

 

 

product key technologies

Advantages 

1. It does not cause micro cracks in the remaining structure, ensuring high quality of repaired concrete.
2. Robotic hydraulic demolition equipment does not generate vibration, and noise and dust are greatly reduced, which is safe and environmentally friendly.
3. It can be removed selectively and non-selectively.
4. Keep the steel bars clean and intact
 

 

02.

5. Prepare an ideal surface for the bonding of new and old concrete.
6. Remove concrete faster than a hammer
7. Use water jets to reduce noise pollution and dust pollution
8. It does not damage the steel bars and removes rust and corrosion on the steel bars
9. Reduce the risk of operator injury
10. Can work horizontally and vertically

 

product details

 

 

hydrodemolition robot 

diesel engine

Inside the device

Hydrodemolition is commonly used to remove damaged or deteriorated concrete from bridges, highways, and other structures. High-pressure water jetting systems not only remove damaged material, but also clean the surface underneath, providing a clean substrate for repair. In addition to power and efficiency, concrete hydrodemolition is a safe and environmentally friendly alternative to traditional demolition methods.

Due to the vulnerability of bridge deterioration and structural defects, selective demolition is required. It is defined as the removal of damaged or low-strength concrete while retaining healthy concrete. Hydrodemolition is an efficient, economical, and precise jetting method that removes deteriorated concrete through high-pressure water jetting.
In addition, compared to traditional concrete milling or scratching methods, hydrodemolition is a safe and non-impact concrete demolition solution that does not cause micro-cracks in the existing substrate.

Choose high-pressure water demolition for precise concrete removal
When you need to selectively remove concrete in a controlled manner without damaging the reinforcement or creating micro-cracks, high-pressure water demolition is required. It is an ideal solution to reduce dust, vibration and excess noise generated in the workplace
This high-pressure water demolition system combines a wireless remote-controlled robot, does not require scaffolding, and protects workers from harm.

This concrete high-pressure water demolition robot uses high-pressure water jets. It moves over the concrete surface at a constant speed and under high pressure. It exploits the permeability of concrete and breaks it up using a hydrojet to generate high-pressure water. The automation of the hydrodemolition robot allows the operator to perform both selective and non-selective demolition.

 

Effect comparison

Concrete demolition

Bridge demolition 

Bridge demolition

Increasingly, infrastructure requires innovative concrete removal methods to repair and patch defective cement, and hydroblasting systems using robotic jetting equipment can provide an efficient and safe alternative to remove deteriorated concrete from vulnerable structures.
Due to the strong and clear bonding surface produced by the hydroblasting system, the use of hydroblasting can provide additional durability to better strengthen bridges, thus driving the infrastructure industry one step closer to innovation in solving deteriorated concrete problems through hydroblasting.

Ideal Application Areas for Hydraulic Demolition Robots
Hydraulic demolition robot equipment is mainly used for bridge surfaces and substructures, tunnels, and hydraulic demolition robots are beneficial for bridge repair. Because it is a safe method, it can reduce the risk of micro cracks.
Hydraulic demolition robots enable a versatile, safe and precise demolition method that can be used to repair a variety of large, small and hard-to-reach projects, including concrete structure repair and demolition.
Whether you need simple surface treatment or complete concrete demolition, our hydraulic demolition machines are used in multiple industries to help repair and restore structures and infrastructure, including but not limited to:
Roads, bridges and runways
Ports and docks
Parking lots
Pillars, piles and pillars
Tunnels and pipelines
Nuclear power plants
Water treatment facilities

Customer Cases

 

Bridge Demolition

Dam demolition

Building demolition

Building demolition

Tunnel demolition

Bridge Demolition

Zhengzhou GuangYuan Cleaning Equipment Co.,Ltd. Is a manufacturer for high pressure water jetting machine, founded in 2012, is committed to explore the field of a high pressure water jet market brand. Our company is located in Henan Province, China.

We are professional in the design, manufacture and production of high pressure cleaning machine, water blaster, High pressure cleaner, high pressure pump, cleaning system customization etc. Our cleaning machine can be applied in both industrial and family cleaning, such as shipyard, power plant, starch factory, etc.  Our company has years of research and experience in first-class design technology, excellent assembly line and good quality control system. Our products are welcomed by customers from all over the world. We sincerely look forward to cooperating with new and old clients.

01

Advanced Technology

We work closely with KAMAT, a world leader in cleaning machine industry, with the highest pressure of 3000bar, which is currently the highest pressure in the world's high-pressure water jet field.

02

Stable and Safe

The pressure regulating valve is flexible and light. The overpressure protection safety valve opens and closes sensitively and reliably. The bursting pressure of the high-pressure hose is 2.5-3.5 times the rated pressure.

03

Excellent Quality

The high pressure cleaning machine is manufactured and inspected strictly in accordance with national and industry standards before leaving the factory. It can work continuously for 24 hours at rated pressure

04

Custom Service

We understand that different industries and cleaning requirements may have specific needs. Therefore, we offer customization service, allowing customers to tailor the machine to their unique requirements.

1. Packing: Plywood packing

2. Shipping way: suggest deliver by sea

3. Delivery port: Qingdao Port; or deliver to any port you need

Hot Tags: water jet concrete demolition system, China water jet concrete demolition system suppliers, factory, , , hydro jet cleaning equipment