Tube Cleaning Equipment

Tube Cleaning Equipment

Tube cleaning equipment can select an appropriate pressure level based on the composition of the scale and cleaning requirements. It will not cause physical damage and can keep the surface of the reactor smooth, making it difficult for scale to adhere to the reactor. Use the kinetic energy of high-pressure water jets to break up the hard dirt on the inner wall of the reactor and the surface of the stirrer, thereby completely peeling off and removing it.
Send Inquiry
Product Introduction
Products Description

 

The water jetting system can select an appropriate pressure level based on the composition of the scale and cleaning requirements. It will not cause physical damage and can keep the surface of the reactor smooth, making it difficult for scale to adhere to the reactor. Use the kinetic energy of high-pressure water jets to break up the hard dirt on the inner wall of the reactor and the surface of the stirrer, thereby completely peeling off and removing it.

 

Products features

 

1. The high-pressure cleaning pump for industrial pipelines has good cleaning effect. According to the analysis of scale and cleaning requirements, select the appropriate pressure level. High-pressure water jet cleaning will not cause physical damage to the reactor and can better maintain the surface of the reactor. smooth,

2. High cleaning efficiency, cleaning speed is several times or even dozens of times faster than traditional methods

3. The cleaning safety is good, and personnel do not need to enter the reactor, which completely avoids the harm and unsafety of chemicals in the tank to the human body, and completely eliminates potential safety hazards;

4. No environmental pollution. High-pressure water jet cleaning uses water as the medium, which is odorless, tasteless and non-toxic. After the sprayed jet is atomized, it can reduce the air dust concentration in the working area and reduce the atmospheric dust to the national regulations. below safety standards. Water jet cleaning releases no harmful substances and avoids environmental pollution problems that may be caused by chemical cleaning.

 

water jetting system parameters:

 

INPUT SPEED r/min

1480

PLUNGER STROKE mm

95

REDUCTION RATIO

4.45

PUMP SPEED r/min

405

ELECTRIC POWER

75

90

110

PLUNGER DIAMETER

mm

WATER FLOW

RATE PRESSURE (Bar)

 

M³/h

L/min

   

2.40

40

1000

   

22

2.70

45

850

1000

 

24

3.12

52

750

900

1000

26

3.60

60

650

800

950

28

4.20

70

600

700

850

30

 

Application for water jetting system

 

It is used in starch factories, sugar factories, steel plants, power plants, chemical plants and other industrial tube cleaning, heat exchanger, condenser cleaning, boiler pipe cleaning and maintenance, ship hull cleaning, concrete roughening and roughening, high and low cleaning to save gas, Preheater, primary cooler and air separation oil cooler, air preheater, steam turbine, condenser, heating network heater, can also pump clean water, thin oil, etc. for pipeline pressure testing'

product-1002-261

Hot Tags: tube cleaning equipment, China tube cleaning equipment suppliers, factory, sewer jetting machine

Send Inquiry

whatsapp

Phone

E-mail

Inquiry