Industrial Cleaning System

GuangYuan Industrial cleaning system is with high pressure 70Mpa to 150Mpa; for industrial pipe cleaning, heat exchanger pipe / condener pipe, tube ,tank cleaning, rust paint removal, etc. welcome customized.

In recent years, ultra-high pressure cleaning machines have gradually developed, and ultra-high pressure water jet technology is currently a very effective road marking removal process. Commonly used traditional road marking removal methods are divided into manual cleaning, chemical cleaning and mechanical cleaning. Although these traditional road marking removal methods can remove the markings cleanly, they will damage the road surface, affect the road landscape, and increase the cost of road maintenance. Therefore, it is very important to choose the appropriate road marking removal method according to the degree of impact on traffic, the required operation time and the degree of impact on the environment.

 

 

product key technologies

01.

Advantages of using hydro jetting for road marking cleaning machine

1. No chemicals additives or abrasive materials are used during hydro blasting

2. No fumes, smoke or dust is generated and environmental

 

02.

3. Noise levels are quite lower than traditional road marking removal techniques

4. Suitable for using on all types of road surfacing materials

5. Operating with traffic flow during the operator drive on the truck

6. Self contained unit complete with debris vacuum recovery can collecting all of the mixing after jetting

7. Minimal surface impact on the road not only cement or asphalt road

 

product details

 

 

Wheels for easy mobility

diesel engine

our factory appearance

GuangYuan Industrial cleaning system is with high pressure 70Mpa to 150Mpa; for industrial pipe cleaning, heat exchanger pipe / condener pipe, tube ,tank cleaning, rust paint removal, etc. welcome customized.

High way markings introduced water blasting as a road marking removal technique. lt is now the preferred road marking removal technique by authorities.

Water blasting quickly removes markings faster and more thoroughly than abrasive methods. This method will not damage the pavement or asphalt of the road . Water blasting -hydro blasting is fast and productive, and avoids exposing the environment to chemicals or contaminants. lt also simplifies clean up, is dustless and leaves a clean surface.

Ultra-high pressure cleaning machines have become the leading equipment for industrial cleaning in the world. Ultra-hydro blasting machines use the impact force, shear force and other factors of ultra-high pressure water jets to act on the surface of the markings, destroying the structure and state of the markings, thereby achieving the effect of clearing the marking layer. The key technologies for water jet marking removal are the development of ultra-high pressure pump units and the analysis of the marking removal mechanism and influencing factors. In the operation of clearing traffic signs, different water jet pressures, moving speeds, etc. should be used according to the actual thickness of the markings, so as to achieve better cleaning efficiency and effect.

The cleaning effect should not only refer to the cleaning quality, but also consider the cleaning efficiency. The cleaning effect of road marking lines mainly depends on four aspects: jet pressure, actuator movement speed, target distance, and rotary joint speed. Only by mastering the factors that affect ultra-high pressure water cleaning equipment can we achieve twice the result with half the effort in actual use, and truly make ultra-high pressure cleaning machines give full play to their advantages of wide cleaning range, low cost, high efficiency, good quality, water saving and environmental protection in industrial cleaning.

 

Hand-push device

Hand-push device

Rotating sprinkler device

Disc cleaning device

The ultra-high pressure water flow generated by the high-pressure cleaning machine is continuously input into the hand-push cleaning machine through the high-pressure hose, and then sprayed at high speed on the road surface. The water pressure can reach 1500bar. Where the hand-push device is pushed, the road surface is intact after the rotational flushing of the high-pressure water flow, and the painted marking lines on the road are cleaned cleanly by the road marking remover.

Features of the Hand-push device:

1. The cart is equipped with a height adjustment device, which can adjust the height of the rotating head at will for easy use.

2. The cleaning car is designed with a remote control switch, which can remotely control the switching of high and low pressure working states

3. The rotating mechanism adopts an original design and can support a high pressure of 1500 kg.

4 The rotating head can clean up to 200mm in width and faster in cleaning speed.

5. The rotating head is equipped with a circular protective device, and a suction device can be added to ensure the cleanliness of the work site.

Application GuangYuan Industrial cleaning system is with high pressure 70Mpa to 150Mpa; for industrial pipe cleaning, heat exchanger pipe / condener pipe, tube ,tank cleaning, rust paint removal, etc. welcome customized.

Water blasting road marking cleaning machine uses ultra high pressure (UHP) water to remove markings from concrete and asphalt. The needle sharp water jets can even pulverize temporary marking tape. Hydro blasting causes the least amount of scarring but is not powerful enough for the smoothing of uneven surfaces, nor for inlay and grooving applications.

Road marking is designed for the road sign and instruction, but sometimes they need to be removed. For instance when a traffic situation changes or a parking lot is redesigned. special tools enable you to remove stripes and pavement markings efficiently.

Removing existing road strips or pavement markings is a real challenge. The markings must be efficiently removed without causing damage to the road surface. sometimes the lines are even harder than the underlying asphalt. Moreover the materials used in asphalt are very porous, allowing road paint to penetrate the surface pores. Reason enough to get yourself the right equipment for your road paint removal jobs.

Such jetting system also can be used for old paint ,rust , protective coating removal

A grinder is the traditional tool for fast and clean road marking removal cleaning. These specialized machine enable you to remove all of lines on the roadways.

Customer Cases

 

Road Marking Removal

Road Marking Removal

Road Marking Removal

Road Marking Removal

Road Marking Removal

Road Marking Removal

Zhengzhou GuangYuan Cleaning Equipment Co.,Ltd. Is a manufacturer for high pressure water jetting machine, founded in 2012, is committed to explore the field of a high pressure water jet market brand. Our company is located in Henan Province, China.

We are professional in the design, manufacture and production of high pressure cleaning machine, water blaster, High pressure cleaner, high pressure pump, cleaning system customization etc. Our cleaning machine can be applied in both industrial and family cleaning, such as shipyard, power plant, starch factory, etc.  Our company has years of research and experience in first-class design technology, excellent assembly line and good quality control system. Our products are welcomed by customers from all over the world. We sincerely look forward to cooperating with new and old clients.

01

Advanced Technology

We work closely with KAMAT, a world leader in cleaning machine industry, with the highest pressure of 3000bar, which is currently the highest pressure in the world's high-pressure water jet field.

02

Stable and Safe

The pressure regulating valve is flexible and light. The overpressure protection safety valve opens and closes sensitively and reliably. The bursting pressure of the high-pressure hose is 2.5-3.5 times the rated pressure.

03

Excellent Quality

The high pressure cleaning machine is manufactured and inspected strictly in accordance with national and industry standards before leaving the factory. It can work continuously for 24 hours at rated pressure

04

Custom Service

We understand that different industries and cleaning requirements may have specific needs. Therefore, we offer customization service, allowing customers to tailor the machine to their unique requirements.

1. Packing: Plywood packing

2. Shipping way: suggest deliver by sea

3. Delivery port: Qingdao Port; or deliver to any port you need

Hot Tags: industrial cleaning system, China industrial cleaning system suppliers, factory, , , , sewer jetting machine, pipe cleaning equipment