Hydro Blasting Equipment For Airport Glue Removal

 

The 22000psi hydro blasting machine can not only be used for airport glue removal and road marking removal, but also can clean dirt on the ground surface and remove reflective film on the surface of signs. It is a multi-functional cleaning equipment.

 

The principle of the road marking removal high-pressure jetting machine is to continuously input the ultra-high pressure water flow generated by the high-pressure cleaning machine into the hand-push cleaning machine through a high-pressure hose, and then spray it on the road surface at high speed. The water pressure can reach 1500bar. Wherever the hand-push cleaning machine is pushed, the road surface will be intact after the rotation and flushing of the high-pressure water flow, and the road markings will be cleaned by the road marking remover.

 

In recent years, ultra-high pressure cleaning machines have gradually developed, and ultra-high pressure water jet technology is currently a very effective road marking removal process. Commonly used traditional road marking removal methods are divided into manual cleaning, chemical cleaning and mechanical cleaning. Although these traditional road marking removal methods can remove the markings cleanly, they will damage the road surface, affect the road landscape, and increase the cost of road maintenance. Therefore, it is very important to choose the appropriate road marking removal method according to the degree of impact on traffic, the required operation time and the degree of impact on the environment.

 

 

Water Blasting (Hydro Jetting) Road Marking / Pavement Cleaning machine

Using hydro blasting to remove the road markings can be quick, easy, and efficient, Whether the road markings are red, white, yellow, or more, Using a top of the range electronically controlled water jetting system can remove the markings through propelling itself back wards and forwards with ultra high pressure water.

High way markings introduced water blasting as a road marking removal technique. lt is now the preferred road marking removal technique by authorities.

Water blasting quickly removes markings faster and more thoroughly than abrasive methods. This method will not damage the pavement or asphalt of the road . Water blasting -hydro blasting is fast and productive, and avoids exposing the environment to chemicals or contaminants. lt also simplifies clean up, is dustless and leaves a clean surface.

 

Ultra-high pressure cleaning machines have become the leading equipment for industrial cleaning in the world. Ultra-hydro blasting machines use the impact force, shear force and other factors of ultra-high pressure water jets to act on the surface of the markings, destroying the structure and state of the markings, thereby achieving the effect of clearing the marking layer. The key technologies for water jet marking removal are the development of ultra-high pressure pump units and the analysis of the marking removal mechanism and influencing factors. In the operation of clearing traffic signs, different water jet pressures, moving speeds, etc. should be used according to the actual thickness of the markings, so as to achieve better cleaning efficiency and effect.

 

The cleaning effect should not only refer to the cleaning quality, but also consider the cleaning efficiency. The cleaning effect of road marking lines mainly depends on four aspects: jet pressure, actuator movement speed, target distance, and rotary joint speed. Only by mastering the factors that affect ultra-high pressure water cleaning equipment can we achieve twice the result with half the effort in actual use, and truly make ultra-high pressure cleaning machines give full play to their advantages of wide cleaning range, low cost, high efficiency, good quality, water saving and environmental protection in industrial cleaning.

The ultra-high pressure water flow generated by the high-pressure cleaning machine is continuously input into the hand-push cleaning machine through the high-pressure hose, and then sprayed at high speed on the road surface. The water pressure can reach 1500bar. Where the hand-push device is pushed, the road surface is intact after the rotational flushing of the high-pressure water flow, and the painted marking lines on the road are cleaned cleanly by the road marking remover.

 

Features of the Hand-push device:

1. The cart is equipped with a height adjustment device, which can adjust the height of the rotating head at will for easy use.

2. The cleaning car is designed with a remote control switch, which can remotely control the switching of high and low pressure working states

3. The rotating mechanism adopts an original design and can support a high pressure of 1500 kg.

4 The rotating head can clean up to 200mm in width and faster in cleaning speed.

5. The rotating head is equipped with a circular protective device, and a suction device can be added to ensure the cleanliness of the work site.

 

 

Model	GYB-5 1500/85
Pump Speed	366 rpm
High pressure pump	Triple plunger pump
	Pump head material: Stainelss steel
	Plunger material: stainless steel
	Pump speed:366rpm
	Plunger stock:120mm
Rate Pressure	1500 bar / 22000 psi
Water flow	85 L/min
Plunger dia.	22mm
Electric motor drive	160kw, 3Phase, 380v/50Hz or 440v/60Hz
Diesel engine drive	225kw, 6-cylinder

 

 

 

Application With Ultra High Pressure Water Jetting(Hydro blasting Road Marking cleaning machine

 

Water blasting road marking cleaning machine uses ultra high pressure (UHP) water to remove markings from concrete and asphalt. The needle sharp water jets can even pulverize temporary marking tape. Hydro blasting causes the least amount of scarring but is not powerful enough for the smoothing of uneven surfaces, nor for inlay and grooving applications.

Road marking is designed for the road sign and instruction, but sometimes they need to be removed. For instance when a traffic situation changes or a parking lot is redesigned. special tools enable you to remove stripes and pavement markings efficiently.

Removing existing road strips or pavement markings is a real challenge. The markings must be efficiently removed without causing damage to the road surface. sometimes the lines are even harder than the underlying asphalt. Moreover the materials used in asphalt are very porous, allowing road paint to penetrate the surface pores. Reason enough to get yourself the right equipment for your road paint removal jobs.

 

Such jetting system also can be used for old paint ,rust , protective coating removal

A grinder is the traditional tool for fast and clean road marking removal cleaning. These specialized machine enable you to remove all of lines on the roadways.

 

 

 

 

 

1. Packing: Plywood packing

2. Shipping way: suggest deliver by sea

3. Delivery port: Qingdao Port; or deliver to any port you need

 

 

Hot Tags: hydro blasting equipment for airport glue removal, China hydro blasting equipment for airport glue removal suppliers, factory, high pressure cleaner, industrial pipe cleaning machine